Scavenger Bag Tutorial

"Hello to those of you visiting from Made by Rae!  I'm Steffanie from sew grown.  I'm so glad to be sharing this super fun tutorial with you and participating in Celebrate the Boy!  I have 2 boys of my own so this month is dear to my heart!

I'm a homeschooling mom to 3 small children and love to sew for my boys any chance I get.  It's always more challenging but I've found that every project is more original and rewarding!  Today I will be sharing the Scavenger Bag tutorial with you.  I'm so glad to pass this one on!  It's easy and my boys LOVE their Scavenger Bags!  My boys, like most, love to collect trinkets and explore the backyard for treasures.  This bag gives them the perfect place to store their goodies while keeping their hands free.  It also makes a great library bag!  I hope you enjoy and thanks Rae for another awesome month dedicated to our little guys!"  

Here are a few shots and you can view the original post here if you are interested in learning more about these bags.   

This was obviously not a planned photo shoot but I wanted to show how this bag fits my little guy.  All I can say is he dressed himself and sometimes that's good enough for me!

The Tee for Two skull shirt is still going strong

I dont' think that's going to fit!

 Here is the tutorial.  I hope you enjoy!






What you will need:

• 1/2 yard medium to heavy weight fabric for outer bag and handles. 
• 1/2 yard medium to heavy weight fabric for lining.
• 8" of 1/2" wide elastic.
• Maxi piping.  (approximately 28").
• Bolt Snap or any purse snap of choice.
• D ring (any size of choice)
• 2 sheets 8.5" X11" printer paper

Step 1:  Create your pattern.

To make your pattern you will take 1 sheet of 8.5" by 11"  printer paper and fold it in-half long ways then cut off the raw edge corner at a curve.  You can trace the bottom of a bowl if you need help making a curve.  This will be the top flap of the bag.

Next fold the straight edge of the flap over 2.5" from the bottom and place the flap with the folded edge tucked under on top of your second 8.5" X 11" printer paper.  Draw a straight line along the curved edge and cut.  This will give you a 2.5" strip pattern piece for the sides and bottom of your bag.  The remaining square will be the pattern for the body of the bag and bag liner.

Step 2:  Cut out fabric for outer body and lining.


Using your prepared pattern cut out fabric. 

Step 3: 

Cut fabric for pocket and strap.

You will need to cut 1 strip of fabric 12" X 5" from your outer fabric for the pocket and 2 strips 2" X 31" for the strap.  1 out of lining fabric and one out of body fabric.

Step 5:  Add piping and sew top flap.


Pin piping to the right side of the outer fabric flap raw edges together.  Sew along piping seam all the way around the top flap leaving the back straight edge without piping.  Pin lining flap and outer flap right sides together and sew around leaving straight edge open.  Flip and iron flat.

Note:  It's best to sew on the top seam created when you attached your piping to the outer fabric.  This will insure that no extra seams will show when the flap is flipped. 

Step 6:  Create and add pocket and embellishments.
Fold over top edge 1/4" and then again 3/4".  Sew along folded edge using 1/8" seam allowance.  This will create the pocket for your elastic. 

Attach a safety pin to the end of elastic and feed it through the pocket.

Make sure you have enough gathering to make a good stretchy pocket then pin to front outer bag wrong side of pocket facing right side of bag.  Sew along 3 outer sides using 1/8" seam allowance.   You may need to trim away some of the elastic depending on how your fabric gathers.

To make tabs and loops you will fold scrap fabric in the length and width of your choice in half, unfold then fold in raw edge sides towards the fold line, fold in half again, then top stitch along both sides for tabs or one side for loops.  

Feed D rings or clasps in the loop and attach loops to top of bag on the right side raw edges aligned.

For tab pockets attach to right side of bag along the left and right side of prepared fabric leaving the top and bottom open to slide things in. 

Step 7:  Prepare outer bag and lining.  You will us 1/2" seam allowance unless stated otherwise.

Pin side panels to front with right sides together and stitch.  Next pin back of bag to one side right sides together and stitch.  Fold right sides together and stitch last side together. 

With the bag inside out finish bottom of bag by pinning one side in place right sides together and sew.  Repeat for remaining 3 sides. 

Make sure you center the bottom panel so you will have the 1/2" seam allowances available on the sides. 

Repeat step 7 for bag lining.


Step 8:  Prepare and attach straps.

With right sides together sew along each long side using 1/4" seam allowance and leaving the top and bottom open.

Attach a safety pin to the outer fabric on one end and feed through the handle turning it right side out.  Iron flat when done. 

Top stitch using 1/8" seam allowance.

Turn the bag right side out and with right sides together attach straps to sides using 1/4" seam allowance.  Reinforce stitch a few time to give it extra strength. 

Step 9:  Add flap.

With right side together pin flap to the back on the bag and stitch using 1/4" seam allowance. 

Step 10:  Attach lining to outer bag.


With the lining of the bag wrong side out and the outer bag right side out place the outer bag inside the lining.  This will put them right sides together.  Tuck the flap and straps inside the lining.  All you should see at this point is the wrong side of the lining.  Stitch around the top using 1/4" seam allowance and leaving a 3" opening along the back side.  Flip right side out and finish by top stitching around the entire top using 1/8" seam allowance.

Congratulations!  Your Finished!